Thanks to the good people at Panasonic, I was able to put together a great step by step on how to replace a TYLA1000 lamp. You can find it on page 80 of a Panasonic manual.
Steps to install:
1. Turn power off, wait until power indicator stops blinking red, then unplug the power cord from
the wall outlet and confirm that the area around the lamp unit has cooled down.
2. Remove the Front cover. Place your fingertips under the Front cover and pull it from the projection display.
3. Loosen the Lamp cover screw. First read caution and warning labels on lamp cover. Then, loosen the lamp cover screw by using a screwdriver.
4. Loosen the lamp unit screw with a screwdriver. Then, grasp the lamp unit as shown in the diagram, and slowly remove from the projection display.
5. Insert the new lamp unit being careful of the insertion direction.
6. Replace the Lamp unit and cover screws. Tighten the lamp unit/cover screw with a screwdriver.
7. Replace the front cover.
And now you’re done!
Other Must-Read Articles
